Stone and Tile PROS | Natural Stone, Tile, Concrete
StoneandTilepros.com | A service of...
Your Stone and Tile Information & Resource Super Site

How do I care for my newly installed floors?

The best thing to have done to a brand-new polished stone floor is a detailing job by a properly trained janitor, or a professional stone refinisher. Detailing means deep-cleaning the floor virtually square inch by square inch, removing all possible grout residue or film and adhesive, taking care of possible small damages left behind by installers, or a possible few factory flaws, and open the pores of the stone by using some special cleaning agents, such as a Heavy-Duty Stone, Tile and Grout Cleaner or, in extreme instances, if a grout film is still present over the surface of the tiles, a stone safe Soap Film Remover, which because of the presence of chelates in the formula is excellent at removing mineral deposits. (Grout film could be equated to mineral deposit.) In that way the stone can "breathe" and dry properly. For porous stones like hone-finished limestone or certain mercantile granites, the application of a good-quality stone impregnating sealer is recommended. 

Should you decide not to have your floor detailed... DON’T damp-mop your floor immediately after installation and grouting. While you would not cause any real damage, the fine powder most likely left on the floor will be trapped in the water and may leave ugly and hard-to-remove streaks all over its surface. For the first week or so, just vacuum (being careful not to use vacuum cleaners that are worn. The metal or plastic attachments or the wheels may scratch the surface. Upright vacuum cleaners are not recommended. Canister vacuum cleaners and central vacuum systems are the best) and dust mop (with a NON-treated dust mop or a clean, dry micro-fiber mop) your floor as often as you can. You will know it is ready to be washed when your hand remains clean (no whitish powder) after rubbing it on the floor.

Sand and grit will damage to the surface of stone, so if the stone floor is near an entryway, make sure a good quality mat is placed just outside for people to wipe their feet.

Use a Neutral Cleaner and a microfiber mop to routinely clean the floors.

Our PROS use and recommend Stone Care Central products.
5 (1)
Article Rating (1 Votes)
Rate this article
Attached Files
There are no attachments for this article.
Comments
There are no comments for this article. Be the first to post a comment.
Name
Email
Security Code Security Code
Related Articles RSS Feed
What To Do About Color Variation In Marble Tiles
Viewed 222 times since Fri, Jul 26, 2019
Excess Sealer on Travertine
Viewed 6263 times since Fri, Aug 29, 2008
My dish soap dispenser which I had near the faucet left a dark stain (circle) on the granite which is very noticeable.
Viewed 8078 times since Mon, Mar 10, 2008
limestone with mold / mildew stains in grout joints.
Viewed 8449 times since Sun, Jul 11, 2010
Should I polish and seal my new marble flooring?
Viewed 4013 times since Tue, Nov 17, 2009
I have travertine floors installed in my house and I need to know what is the best way to go with polishing this type of floors?
Viewed 3184 times since Thu, Mar 1, 2007
How can I find out if I need to seal my stone?
Viewed 2601 times since Thu, Aug 21, 2008
How to remove burn mark on marble
Viewed 8260 times since Tue, Dec 23, 2008
What Product We Recommend To Clean Natural Stone
Viewed 3240 times since Sun, Apr 14, 2013
Why are my marble walls turning white in my shower and how do I clean them?
Viewed 6505 times since Tue, Jan 12, 2010