Stone and Tile PROS | Natural Stone, Tile, Concrete
StoneandTilepros.com | A service of...
Your Stone and Tile Information & Resource Super Site

How to Remove a PVE Oil Stain On Natural Stone

Q. One of our AC repair techs accidentally dripped an oil called PVE (polyvinylether) on a client’s natural stone. The stone was already there when the clients bought the home, so they aren’t sure what kind of stone it is, but we can tell you that it is porous. What specific poultice recipe should we use to remove this stain?

A. Try using diatomaceous earth. It can be mixed with a number of different chemicals to use in different preparations. 

Now, what should you mix with the poultice powder? We have several suggestions for you.

What product do your HVAC technicians use to clean this oil off their tools? Consider mixing the powder with this product, but only if it is not acidic. Acidic substances chemically react with the calcium in natural stone, resulting in etch damage.

If you are not able to use the HVAC tool cleaner, you can try using a mild, all-natural degreaser. For example, there is a commercial janitorial product with D-limonene in it. Some paint strippers also have this ingredient, and they are marketed as "natural or green." 

If you don’t get the results you want, you can try mixing the poultice powder with acetone or a butyl-based degreaser. The ingredients will list this as "butoxyethanol" or something similar. This substance is commonly used in high-powered concrete cleaners. The heavy duty "purple" cleaners are normally butyl. Just be careful and use gloves/wear glasses as the pH will be very high. Also make sure that the dye that is added doesn’t make your poultice too colored, because it can be transferred to the stone. Add some water for consistency and to lighten the color of the poultice, if needed. 

Regardless of your poultice ingredients, it should be the consistency of peanut butter. Put plastic on the poultice mixture and wait 12-24 hours. After that, remove the plastic and let it completely dry. 

If you get a stain to "move" or lighten, that is good news. This process can be repeated as many times as necessary to completely remove the stain. 

If you are unable to remove the stain and if the stone is not sealed, ask if your client will allow you to apply a color enhancing impregnator. Apply it up to and around the stain but not on it. This will help the customer avoid other stains in the future and it should blend the darkened stain with the surrounding area. 

Good luck. Oil is a tricky one and has to be evaluated on a case by case basis.

To learn more about mixing and applying a poultice, visit our Stain Removal Application. And of course, if you feel like you are in over your head and would rather entrust this difficult stain to a professional stone restoration contractor, then Find A Pro in your area.
0 (0)
Article Rating (No Votes)
Rate this article
Attached Files
There are no attachments for this article.
Comments
There are no comments for this article. Be the first to post a comment.
Name
Email
Security Code Security Code
Related Articles RSS Feed
How to Remove Red Candle Wax from Granite
Viewed 2207 times since Mon, Oct 10, 2016
How to Remove Vinegar Stain on Mosaic Tile
Viewed 224 times since Mon, Nov 18, 2019
How To Remove Coffee Stain On Porcelain Tile
Viewed 482 times since Fri, Sep 6, 2019
Can Dye Be Removed From the Limestone
Viewed 830 times since Tue, May 15, 2018
How to Remove an Etch Mark Caused by Lime Juice on Bluestone
Viewed 893 times since Thu, May 16, 2019
How to Remove Pickling Vinegar Stain on Flagstone
Viewed 276 times since Wed, Oct 23, 2019
How to Remove Color-Enhancing Sealer on Marble Floor
Viewed 125 times since Thu, Mar 12, 2020
Liquid Plumber Causes Alkaline Etch Damage On Limestone
Viewed 969 times since Fri, Mar 8, 2019
How to Remove Stain on Porcelain After Slip Resistance Treatment
Viewed 80 times since Thu, Apr 9, 2020